Faster and more comprehensive characterization of materials
Based on over 50 years of experience in thermogravimetry, NETZSCH has developed the thermobalance TG 209 F1 Libra®. This instrument allows for analyses to be carried out even faster, more accurately, and across an extended temperature range.
Twice as fast by means of BeFlat®
In contrast with other thermobalances, no time-consuming baseline determinations need normally to be carried out with the TG 209 F1 Libra® prior to a measurement. The unique BeFlat® function of the Libra automatically compensates for any external factors influencing the measurement. This cuts work hours by up to 50%, leaving more time available, for example, for further measurements.
20 times faster due to high heating rates
The heart of the TG 209 F1 Libra® is the micro furnace made of high-performance ceramics. It not only allows for a wider sample temperature range of up to 1100°C, but also for heating rates of up to 200 K/min. The user can thus receive the results of the analysis – even at highest temperature – within a few minutes, i.e. 20 times faster than for other thermobalances.
More comprehensive and faster characterization by patented c-DTA®
With the TG 209 F1 Libra®, the sample temperature is measured directly. Endo- and exothermal reactions can now be detected and show, for example, the melting point of the sample, in the evaluation. This yields considerably more information on the sample behavior without having to carry out further measurements.
High-performance ceramics for a long lifespan
The lifespan of the new, especially designed ceramic furnace – even when investigating materials containing corrosive components – is many times longer than that of conventional thermobalances. The analysis of fluorinated or chlorinated polymers is therefore no problem. The reaction and purge gases flow in the natural, vertical direction. Condensation on measure-relevant components (sample holders) can therefore be excluded. This not only is gentle on the material, but also prevents occurrence of the dreaded memory effect which can distort subsequent measurements in conventional systems.
- Temperature range:
RT to 1100°C at the sample
- Max. furnace temperature:
- Heating and cooling rates:
0.001 K/min to 200 K/min
- Cooling time:
12 min (1100°C to 100°C)
- Wide measuring range:
- Sample crucible volume:
up to 350 µl
inert, oxidizing, reducing, static, dynamic
- Vacuum-tight assembly:
up to 10-2 mbar (1 Pa)
The TG 209 F1 Libra® runs under Proteus® software on Windows®. The Proteus® software includes everything you need to carry out a measurement and evaluate the resulting data. User-friendly menus combined with automated routines make Proteus® very easy to use while still providing sophisticated analysis. The Proteus® software is licensed with the instrument and can of course be installed on other computer systems.
You can use the following software with this product:
- Mass changes in % or mg
- Automatic evaluation of mass changing steps
- Determination of mass-/ temperature pair of variates
- Determination of the residual mass
- Extrapolated onset and endset
- Peak temperatures of the 1st and 2nd derivate of the mass changing curve
- Automatic baseline- and buoyancy-correction
- c-DTA® for the calculated DTA signal for recognition of endo- and exothermal reactions
- Super-Res® for automatic rate controlled mass change and high resolution temperature programs (optional)
- Sectoral software solutions for conformity, e.g., to GLP and GMP
The TG system with an automatic sample changer can handle up to 192 crucibles/pans evenly distributed on two removable trays. Different types of crucibles/pans are allowed up to 8 mm Ø in and 8 mm in height. A four-needle gripper handles different crucibles by using the appropriate gripping pressure for the chosen pan. For calibration and correction purposes, a fixed strip with additional 12 crucible/pan positions is available. Crucible/pan recognition in flight is available. A crucible/pan and lid data base is linked to the ASC. The sample trays are covered by an automatically controlled cover. After closing the cover, the space above the sample pans is purged by branching gas channels integrated in the cover. The purge gas rate is adapted to opening and closing the cover. For this purpose, a further purge gas inlet is available only for the use with the ASC. A “remove lid” function is integrated to cover the sample while waiting its turn to be inserted into the TG cell. Alternatively, a piercing device is optionally available for piercing the lid prior to measurement. The TG system has a refuse bin for disposing lids and non-reusable pans. It is possible to archive the micro-plate trays (storage sample). For better identification, the plates have a serial number and 2D code. The tray identification feature is linked to a crucible/lid data base.
The TG 209 F1 Libra® can be coupled to the Quadrupole Mass Spectrometer QMS 403 D Aëolos® and/or to an FT-IR Spectrometer or to a GC-MS. Gases released are conducted via a heated fused silica capillary or transfer line directly into the gas analyzer, where the volatile fragments can be detected down to the ppm-range during the decomposition of the sample.
|Crucibles (Pans) for General Applications – TG 209 F1 Libra®|
|Temperature Range||Consisting of||Dimension/|
|Al2O3 (99.7)||Max. 1700°C||Crucible||ø 6.8 mm / 85 μl||GB399972|
|Al2O3 (99.7)||Max. 1700°C||Lid||For GB399972||GB399973|
|Quartz||Max. 1000°C||Crucible||ø 6.7 mm / 85 μl||GB399974|
|Quartz||Max. 1000°C||Lid||For GB399974||GB399975|
|Pt/Rh (80/20)||Max. 1700°C||Crucible||ø 6.8 mm / 85 μl||GB399205|
|Pt/Rh (80/20)||Max. 1700°C||Lid||For GB399205 and NGB801556||GB399860|
|Pt/Rh (80/20)||Max. 1700°C||Crucible||ø 6.8 mm / 190 μl||NGB801556|
|Al (99.5)||Max. 610°C||Cruciblel||ø 6.7 mm / 85 μl||Set of 100 pieces||NGB810405|
|Al (99.5)||Max. 610°C||Lid||For NGB810405||NGB810406|
|Gold (99.9)||Max. 900°C||Crucible + lid||ø 6.7 mm / 85 μl||6.225.6-93.3.00|
|Silver||Max. 750°C||Crucible + lid||ø 6.7 mm / 85 μl||6.225.6-93.4.00|
|ZrO2||Max. 2000°C||Crucible||85 μl||CaO-stabilized||GB397053|
|ZrO2||Max. 2000°C||Lid||For GB397053||GB397052|
|Graphite||Max. 2200°C||Crucible||85 μl||GB399956|
|Graphite||Max. 2200°C||Lid||For GB399956||GB399957|
|Al2O3 (99.8)||Max. 1700°C||Cruciblel||ø 9 mm, height 7 mm, volume 350 μl||Sample holder for large samples required||NGB800453|
|Al2O3 (99.8)||Max. 1700°C||Lid||NGB800454|
|Al2O3 (99.7)||Max. 1700°C||Cruciblel||ø 8 mm, height 8 mm, volume 300 μl||Sample holder for large samples required, ASC-compatible||NGB803698|
|Al2O3 (99.7)||Max. 1700°C||Lid||For crucible NGB803698||NGB808209|
Investigation of the thermal evolution process of mixed oxide solid films by means of TG-MS
published: Journal of Thermal Analysis and Calorimetry
Characterization of Dust Samples in Occupational and Environmental Medicine
published: NETZSCH Onset 4/2008
This application note highlights the capability of the BeFlat® correction being a smart solution for the influence of the heating rate and gas flow without a separate baseline measurement.
Application brochure: Research and Development - Substances, Components, Quality Control and Process, Extrusion, Injection Molding, Coating, Quality Assurance - Finished Goods, Material Properties and Main Measuring Methods; 8 pages